Avionics release 10A board to board connector for small portable terminal

Japan Aviation Electronics Industry has developed a wide 2.2mm, 0.7mm height fitting small stackable board-to-board connectors "WP10 series." For smart phones, wearable devices and tablet PCs and other small portable terminals.

       The new product is equipped to support high-current power supply terminals, which can be through the smartphone maximum rated current 10A (5.0A / terminal × 4 poles). Signal terminal 2 poles. Power supply and signal terminals are supported torsional stress, two-point contact structure can produce high pull-out strength. With increased force can pull out lock, it is equipped with a fitting surface protection and suppression broken pieces fitting firmly reinforced fastener.

       Operating temperature range -40 ~ + 85 ℃. Contact resistance of 40mΩ or less (initial signal terminal) or less 20mΩ (initial supply terminals). Insertion and removal life 30 times. Signal terminals rated current, AC and DC each 0.4A / 1 pole. Rated voltage, AC and DC are 50V. Insulation resistance 100MΩ or more (initial). A withstand voltage of AC 250Vr.m.s (within 1 minute). Comprehensive insertion force is 40N or less. Integrated pull force 10N or more. Pb-free products on the connector applied to a nickel barrier to prevent solder climbing (Solder Wcking).

Shielded FFC Cable Flex circuit manufacturer  Flex flat cable Manufacturers