Custom Edp cable factory edp cable assembly manufacturer

 

Custom Edp cable factory

eDP (Embedded Display Port) cable is a screen cable based on DP architecture and protocol digital interface. Darlox is professional Manufacturer of EDP Cable assembly with high transmission rate, low power consumption and small size.

Plug P/N:  I-PEX 20453-330T,I-PEX 20453-340T

Receptacle :  I-PEX 20455-030E, I-PEX 20455-030E

Darlox is Edp cable factory of 30 pin 40 pin edp cable, IPEX 30 pin edp cable assembly, I-PEX 40 pin edp cable assembly, custom edp cable 30 pin,custom edp cable 40 pin,edp cable manufacturer

Relevant Parts P/N:JAE HD1S040HA1,8-2069716-3,5-2069716-3,2023344-3,8-2069716-2,5-2069716-2,2023344-2








The edp screen cable refers to a 0.3-0.5 small-pitch welding flat cable with a screen interface, which is divided into single channel and dual channel. The edp screen wire is generally 2 groups of twisted wires, 3 groups of twisted wires, 5 groups of twisted wires, and 8 groups of twisted wires.

Common edp screen wires are 2 sets of signal wires (stranded wires) and 3 sets of signal wires.

The lvds screen line is divided into two types: SD line and HD line.

lvds screen line (HD line) screen interface is 0.5 pitch double row. Namely JAE FIRE51P HD line

The lvds screen line (standard line) means that the screen interface is 1.0 pitch, 1.25 pitch, and the terminals are assembled by riveting. Commonly there are single eight lines and double eight lines. Most single eight lines are FIX-30P, DF141.25-30P, and double eight lines are mostly FIX-30Pin.

40 PIN LVDS CABLE

What’s Internet of Things

 What’s Internet of Things

The Internet of Things (Internet of Things, referred to as IOT) refers to real-time collection of any information sensors, radio frequency identification technology, global positioning system, infrared sensors, laser scanners and other devices and technologies that need to be monitored, connected, and interacted. Objects or processes, collect various required information such as sound, light, heat, electricity, mechanics, chemistry, biology, location, etc., and realize the ubiquitous connection of objects and objects, objects and people through various possible network accesses. Realize the intelligent perception, recognition and management of objects and processes. The Internet of Things is an information carrier based on the Internet and traditional telecommunications networks. It allows all ordinary physical objects that can be independently addressed to form an interconnected network.

Article is from blog.globalcablesource.com 

Internet of Things is coming

 In 2020, there sre more than 50 billion connected devices in the global Internet of Things, which will generate 600 zettabytes of information. How will such a huge amount of data affect and change our lives and work?

The world-renowned futurist Peter Diamandis described an era of great knowledge. In this era, we will be able to get everything we want to know anytime, anywhere, and this will be attributed to the globalization of the Internet in the future. At the same time, in this era, privacy will disappear with the open network.

Diamandis believes that the four innovative technologies of satellites, drones, autonomous driving and augmented reality are connecting all devices in the world through sensors to create a truly interconnected society.

Satellite imaging and orbital IoT

Satellite Internet companies such as SpaceX and OneWeb are building a space Internet through orbiting satellites, bringing us into the era of a microsatellite constellation.

OneWeb is developing nearly 900 satellites, and SpaceX will deploy more than 12,000 mini-refrigerator-sized satellites. Both companies plan to build a global 5G Internet network to provide affordable Internet access for everyone on the planet, and this represents only a small part of the potential brought about by related deployments.

Equipped with high-resolution micro-satellites, the Internet of Things (IoT) will be effectively expanded, providing a large amount of data to help solve the global digital divide.

Blog from https://microcoax.online/2021/05/21/internet-of-things-is-coming/

Read more>>

Custom 40 Pin Lvds Cable Assembly Electric Wire Harness

 

40 Pin Lvds Cable Assembly

40 pin lvds cable assembly for LED screen/LCD Universal Display Screen Cable/ Double Eight Wire / Single Eight Wire LVDS Harness Professional Custom 40 Pin Lvds Cable Assembly Electric Wire Harness Manufactuer

Brand:DARLOX

Payment:T/T, Paypal, Western Union


Color:Black or customized

Shipping Port:Guangzhou

Lead Time:2 Weeks

PRODUCT DETAILS

Product Name	Custom 40 pin Electronic LVDS Cable for  LCD screen  replacement double 8 LCD screen electronic line
Cable Size	LIYvz 0.08mm² or UL1571#28AWG
Length	400mm
Jacket	PVC
Current Voltage	DC36V
Weight	15.7 g
RoHS compliant	Yes
Services	OEM, samples

• What are LVDS cables?

LVDS (Low-Voltage Differential Signaling) is a differential signal technology with low power consumption, low bit error rate, low cross-talk and low radiation. This transmission technology can reach more than 155 Mbps. Extremely low voltage swing high-speed differential transmission data can realize point-to-point or point-to-multipoint connection, and its transmission medium can be a copper PCB connection or a balanced cable.

What is coaxial cable used for

 Classification of coaxial cables

According to the different insulation medium, the inner and outer conductors are divided into:

Foam insulated cables: The insulator of the foam insulated cables is made of physical foamed polyethylene materials; foam insulated cables are generally used in the telecommunications industry.

Foam insulated radio frequency coaxial cables are divided into transmission cables and leaky coaxial cables (LCX, Leaky Coaxial cable) according to their transmission properties. Transmission cables are ordinary feeders, mainly used for RF signal transmission, while leaky cables have hundreds or thousands of small holes (or slots) on their outer conductors. These holes correspond to numerous RF emission points, so that the power can be Multi-point radiation along the cable, which integrates signal transmission and signal transmission and reception functions. It has the dual function of coaxial cable and antenna. It is specially used for some roads, railway tunnels, subways, buildings, mines, large exhibition halls or airports. Areas where wireless signal propagation is limited and difficult to cover. Currently, foam insulated radio frequency coaxial cables are mainly used as radio frequency signal transmission cables for cellular mobile communication systems such as GSM, CDMA, UMTS, LTE, etc. In addition, there are also other applications, such as the connection between antenna arrays and radio frequency. Connection or jumper between equipment and indoor coverage system...

Read More >> 

Custom 30 pin 40 pin edp cable assembly

 

30 pin 40 pin edp cable assembly

Plug P/N:  I-PEX 20453-330T,I-PEX 20453-340T

Receptacle :  I-PEX 20455-030E, I-PEX 20455-030E

We could custom edp cable manufacturer 30 pin 40 pin edp cable, IPEX 30 pin edp cable assembly, I-PEX 40 pin edp cable assembly, custom edp cable 30 pin,custom edp cable 40 pin,edp cable manufacturer

Relevant Parts P/N:JAE HD1S040HA1,8-2069716-3,5-2069716-3,2023344-3,8-2069716-2,5-2069716-2,2023344-2

30 pin 40 pin edp cable assembly

Darlox Offers custom 30 pin 40 pin edp cable manufacturer and custom 40 pin edp cable assembly for you, welcom to OEM ODM edp LVDS cables.

The new Embedded DisplayPort (eDP) v1.4 standard offers several new features that maximize system power efficiency. And further consolidate the display interface, and address a wide range of system profiles to satisfy the growing demand for power optimization in the embedded display system.

Custom eDP cable assembly following you requirement. We are professional in custom 30 pin edp cable assembly and custom 40 pin edp cable.

I-PEX CABLINE-VS 30 pin and 40 pin eDP connector specification:

0.5 mm pitch, Horizontal mating Micro-coaxial edp cable factory

VESA standard connector for 16:9 panel application

High-data-rate transfer, ideal for Thunderbolt  3 (20 Gbps per lane) applications

High level EMI shield performance and multi-point ground design

Physical locking bar stops back-out or un-mating

Micro Coaxial Cable manufacturer  
Custom Wire harness assembly, Custom ipex lvds cable

Manufacturer RFC Cables FFC Cables Round flat ribbion cables

 

anufacturer RFC Cables FFC Cables Round flat ribbion cables

Hot Bar soldered flex flat cables




Hot Bar Soldered FFC Cables provide a durable connection by permanently affixing to a PCB via direct soldering







Type : Flexible Flat cables/FFC Cables

Pitch :0.5 - 0.8mm

Pin :customized

Length: customized

Certificates:ISO9001:2008,Ro HS, UL

Services:design/customization

stiffener film thickness: customized

Darlox design and produce custom FFC cable and complete assemblies to your specifications if you can not find what you need.

Please click here to customized ffc cables


Micro Coaxial Cable manufacturer  
Custom Wire harness assembly, Custom ipex lvds cable

How to install a coax cable connector

 

How to connect the coaxial cable connector A coaxial cable is a cable with an insulating (non-conductive) material sheath on the outside. Read below to learn how to connect the coaxial cable between the receiver and the TV.

How to connect the coaxial cable connector
A coaxial cable is a cable with an insulating (non-conductive) material sheath on the outside. Read below to learn how to connect the coaxial cable between the receiver and the TV.
method
1
First steps

Image titled Connect Coaxial Cable Connectors Step 1
1
Select the cable model. The term cable can be a bit confusing. Check the shell of the cable, there are generally good instructions about the cable. In the family, the most commonly used sizes are RG-6 and RG-59.
RG stands for “Radio Guide”. The numbers represent the diameter and inner diameter of the wire (59 means 0.059, 6 means 0.06). This also includes the thinness of the shell and cable, which represents how much signal is lost per unit length.
You will also see the word RF on the cable, which stands for “radio frequency.”
Although the thinner and lower standard RG-59 is still used in some old houses, most non-industrial coaxial cables are best known as RG-6. Commercial installers will use thinner RG cables, such as RG-11 (it only works when the signal source is more than 200 feet away from your home terminal).
The RG cable used for general purpose at home should be 75ohm (RG-6 or RG-59).
Note that all cables (and their connectors) have different qualities. Choose the best quality.
Connect Coaxial Cable Connectors Step 2

2
Choose the correct connector. Most home video installation connectors are made with F-type connectors. However, your system may also use an N-type connector.
Note that there are several F-type RG-6 cables available, and crimped screw connectors are preferred.
Screw connectors are easy to use, but they are less safe and leave some small air holes. Some people feel that this will affect the signal quality.
A crimped connector has two parts: a ring (or a crimp) and a terminal. They are more difficult to install, but as long as they are used correctly, they can get the longest length and the best connection.
Understand that to make a connection, you need the same type of female and male connectors.
The male connector has a center wire, while the female connector does not have a center wire. Make sure you are using the opposite pole. Most cables have a male connector at one end.
For very small cables, use SMA (miniature A version) connectors.
method

Strip the cable
The first step in connecting the connector is to prepare the end of the coaxial cable.
以Connect Coaxial Cable Connectors Step 3
1

Cut the outer sheath of the cable.
以Connect Coaxial Cable Connectors Step 4
2
Peel 1/2 of the outer skin (usually black).
Be careful not to cut the metal band inside the exterior. The metal tape may be some “loose” wires and thin metal sheets wrapped around the wires.
以Connect Coaxial Cable Connectors Step 5
3

Carefully pull the inner metal band (second channel) out of the outer skin. Check to make sure that the metal strap wires are leaking out and the copper wires can be touched.
Connect Coaxial Cable Connectors Step 6
4

Peel the insulating plastic (usually white, but may also be transparent) from the core cable inside.
Never scratch or scratch the wires in the middle. Any wire damage can cause serious signal problems.
Connect Coaxial Cable Connectors Step 7
5

Push the connector into one end of the cable so that the copper wire in the middle can be pulled out.
Make sure that the insulating layer (aluminum foil) is stripped so that the connector terminals can enter.
以Connect Coaxial Cable Connectors Step 8
6

Screw the connector to the end of the cable. The thread will be embedded in the shell and fit tightly together.
method
3
Use crimp connectors
This is another way to connect coaxial cable connectors.
Connect Coaxial Cable Connectors Step 9

1
Put the curved loop on one end of the cable.
以Connect Coaxial Cable Connectors Step 10

2
Peel off 1/4 of the skin.
Connect Coaxial Cable Connectors Step 11

3
Strip the shell, wire sheath and insulation layer to expose the wires inside.
以Connect Coaxial Cable Connectors Step 12
4
Leave 1/8 of the insulating layer.
Connect Coaxial Cable Connectors Step 13

5
Place the terminal at one end of the wire so that the copper core can be pulled out of the hole.
Connect Coaxial Cable Connectors Step 14

6
Push the crimp connector into one end of the cable so that the connector can enter between the outside of the paddle box.
This may be difficult to do. Try to hold one end of the cable with pliers, or clamp it with a pair of clamps. When pushing in, don’t bend it.
Connect Coaxial Cable Connectors Step 15

7
Wrap the loop to the outside of the cable.
以Connect Coaxial Cable Connectors Step 16
8
Strip any loose wires.
Connect Coaxial Cable Connectors Step 17

9
Cut off the outer sheath of the connector end of the inner center wire.
Connect Coaxial Cable Connectors Step 18

10
Drag the connector to make sure it is connected.
hint
If you have a high-speed network and exceed the speed of two TVs, make sure to use a high-quality RG-6 connector. When pushing the connector into the cable conductor, to get a clear image and a good connection, some preparation is necessary. Use push-on connectors available in any popular home repair center. When preparing one end of the wire, make sure not to bend the copper core connector, otherwise it will cause some network problems, such as intermittent connection and data loss.
You can buy wire cutters, crimping machines and pliers for certain coaxial cables of specific diameters. These tools need to be practiced to know how to use them, and you don’t need to use special tools to make connectors. As long as you are careful, ordinary pliers can also be used.
Do not use F-type nut connectors. If this type of inexpensive untested connector is used, the cable signal will “leak” from it. This can cause the signal to leak from the wire, and cause distortion, vertical lines, short lines that move laterally, or small white dots that appear randomly on the screen.
caveat
Professionally used push-type accessories are used on coaxial cables, which are not much more expensive than crimped ones. But these have now begun to replace the crimp type, this is due to the better waterproof seal of the press type, and the node signal is less affected.
If you are not sure what to do, go to a professional at your cable manufacturer. Most people will offer you relatively cheap prices, especially when compared to electrical contractors.
Make sure the connector you use is good. Either perfect or don’t do it. Cable TV signals will leak from bad connectors and affect equipment using RF (including aircraft) technology. Not only that, if the signal leaks too much, it is a violation of FCC (Federal Communications Commission) regulations.

Micro Coaxial Cable manufacturer

Custom ipex lvds cable micro coaxial cables assembly factory

 I-PEX Lvds cable

I-PEX20453-050T I-PEX20455-050E

Item：I-PEX20453-050T

Price：according to quantity & spec

Details：

I-PEX cable I-PEX20453-050T I-PEX20455-050E

Specialing in I-Pex LVDS cable over 20 years,If you need custom some cables

Custom ipex lvds cable micro coaxial cables assembly factory

Common used connector part number: 

I-PEX20453-020T,I-PEX20455-020E,I-PEX20453-030T,I-PEX20455-030E, 

I-PEX20455-040E,I-PEX20453-040T,I-PEX20455-050E,I-PEX20453-050T, 

I-PEX20524-030T,I-PEX20525-030E,I-PEX20524-040T,I-PEX20525-040E 

I-PEX20472-030T,I-PEX20474-030E,I-PEX20472-040T,I-PEX20474-040E 

I-PEX20346-030T,I-PEX20347-030E,I-PEX20345-040T,I-PEX20347-040E 

I-PEX20373-020T,I-PEX20374-020E,I-PEX20373-030T,I-PEX20374-030E 

I-PEX20373-040T,I-PEX20374-040E,I-PEX20373-050T,I-PEX20374-050E 

I-PEX20438-040T,I-PEX20439-040E,I-PEX20438-050T,I-PEX20439-050E, 

I-PEX20320-040T,I-PEX20320-050T,I-PEX20338-044T,I-PEX20384-040T 

JAE FI-RE41CL,JAE FI-RE51CL,JAE FI-X30CL,JAE FI-X30C,JAE FI-NX40CL 

JAE FI-J30C,JAE FI-JH30C,JAE FI-JT30C,JAE FI-VHP50C,JAE FI-D44C 

JAE HD1S040HA1,TYCO 2023344-2,2023344-3,TYCO 5-2069716-3, 

Hirose DF9M-31S-1R,Hirose DF9M-31S-1R,Hirose DF11-32DS-2C   

Hirose DF13-40DS-1.25C,HRS DF14-20S-1.25C,Hirose DF20A-20DS-1C  

TYCO 5-2069716-2,Starconn 111A40-000RA-G3,Foxconn HF5508 

HIROSE DF19-20S,KEL SL,KEL SSL,KEL USL,KEL XSL,KEL USLS 

HONDA LVC-C20LPMSG+,HONDA LVC-D20LPMSG+,HONDA LVC-D20SFYG 

HONDA LVC-C30LPMSG+,HONDA LVC-D30LPMSG+,HONDA LVC-D30SFYG 

HONDA LVC-C40LPMSG+,HONDA LVC-D40LPMSG+,HONDA LVC-D40SFYG 

HONDA LVX-A30LMSG+,HONDA LVX-A30SFYG+ 

HONDA LVX-A40LMSG+,HONDA LVX-A40SFYG+ 

ACES88441-040/ACES50203-040/ACES88341-040 

ACES 91209-01011/ACES 91214/ACES 88107 

2023344-2,2023344-3,2023348-2,5-2023347-2 

5-2023347-3,5-2069716-2,5-2069716-3 

I-PEX 20455-040E-12,Tyco 5-2069716-3, 

Starconn 111A40-000RA-G3,IPEX-20453-040T-01

LVDS cable,eDP cables,SGC cable,I-PEX cable,IPEX Lvds cables,Custom cable 

SGC cable,MCC cable,MCX cable,I-PEX cable,LVDS cable,eDP cable

Custom Wire harness assembly, Custom ipex lvds cable

Custom micro coaxial lvds cable assembly for Molex 51146-0500 JST PAP-04V-S

 LVDS cable assemblies Manufacturer

.

Plug P/N:  JAE FI-X, JAE FI-R,FI-R,FI-S,HRS DF11,DF13,DF14,DF19,DF20

Receptacle : JAE FI-X, JAE FI-R,FI-R,FI-S,HRS DF11,DF13,DF14,DF19,DF20

We are a JAE FI-X, JAE FI-R,FI-R,FI-S OEM LVDS cable, HRS DF11,DF13,DF14,DF19,DF20 lvds cable assemblies

Relevant Parts P/N:JAE FI-RE41HL,FI-RE51HL,FI-X30HL,FI-S30,DF19,DF20DF13,DF14 LVDS cable assemblies Manufacturer

LVDS cable assemblies OEM LVDS cable Manufacturer

As a professional LVDS cable assemblies OEM LVDS cable Manufacturer, we are oem LVDS cable Manufacturer more than 18 years experience in LVDS cable assmeblies fields.

JAE LVDS cable assemblies, Hirose LVDS cable connectors, JST  LVDS cable assembly Manufacturer:

LVDS cable assemblies Outline

High-speed serial transmission such as LVDS, TMDS(HDMI), and PCI Express are widely used in applications in a variety of markets including the personal computer, TV, consumer device, copier and medical device markets.

In these applications connectors not only need to have the ability to transmit signals at high speed, but they also must have the durability, ease of mating, and variety of options to respond to the demands all designs.

The JAE FI-X, JAE FI-R,FI-R,FI-S LVDS cable assembly Manufacturer,

HRS DF11,DF13,DF14,DF19,DF20 lvds cable assembly is ideal connector series to meet these demands. Custom LVDS cable assembly Manufacturer.

We could custom LVDS cable assemblies & OEM LVDS cable for you:

Which are widely used in Computer, medical equipment, security equipment, security equipment,Notebooks,

HD camera,LVDS cable assembly Manufacturer,Smart Appliances,Digital Video Camera,Televisions,Smart Phones,

Medical Instrumentation,Aircraft Cockpit Instrumentation,Automotive, electronic, industrial, medical equipment.

DVD/Blu-ray players,Render massive 3D imaging,Slim LED backlight LCD panel LVDS cable assemblies

Wire or cable used: Micro coaxial cable, Fine Coaxial Cable,SGC cable,Teflon wire,Micro coax,

MCX cable,Shielding cable,electrical wire, flexible welding cable, hook up wire and power cables

Connector Brand: I-PEX,JAE,Hirose,KEL,ACES,JST, Molex, AMP, Tyco, 3M, As per your request

Pitch: 0.3, 0.4, 0.5, 0.6, 0.8, 1.0,1.25,1.5,2.0,2.5,2.54,3.0MM etc.

Custom Wire harness assembly, Custom ipex lvds cable

 

Custom Wire harness assembly

Connector brand: Molex, JAE, JST, Hirose, Kel, Tyco, 3M, LEMO, I-PEX, FCI, Samtec

Custom wire harness assembly: Wire harness assembly molex wiring harness, JAE wiring harness, 3M Wire harness assembly

Darlox Offers custom JAE Wiring Harness Assemblies, Molex wire harness assembly, Hirose Wiring Harness Assemblies, Tyco wire harness assembly, Samtec wiring harness assembly

Custom Wire harness assembly

Darlox Offers OEM ODM Wire harness assembly Wiring Harness Assemblies Customized to you. Using all the connector brand, such as Molex, JAE, JST, Hirose, Kel, Tyco, 3M, LEMO, I-PEX, FCI, Samtec, we are professinoal in wiring harness assembly following your specification.

About Wire harness assemblies and Wiring Harness:

Key Specifications/Special Features:

Custom wire harness assemblies

1. Double-shielded construction

2. Twisted-pair signal lines to enhance anti-interference performance

3. Adapts special insulating material developed by Japan

Softer than PTFE and harder than PVC

4. Single conductor can be made 0.05mm

It fully meets the customer’s requirements for softnessYou can give us your drawing if you cannot find the product that you need

Our R and D team can design for you based on your drawing

OEM/ODM orders are welcome

All cable can be custom-made according to your requests

We could custom cable assembly & wiring harness for you:

Which are widely used in Computer, medical equipment, security equipment, security equipment,Notebooks,

HD camera, Wire harness assembly, Smart Appliances,Digital Video Camera,Televisions,Smart Phones,

Medical Instrumentation,Aircraft Cockpit Instrumentation,Automotive, electronic, industrial, medical equipment.

DVD/Blu-ray players,Render massive 3D imaging,Slim LED backlight LCD panel, UAV wiring harness.

Wiring Harness Assemblies:

A Wiring Harness, also known as a cable harness or wiring assembly, is a grouping of wires, cables, or subassemblies designed to transmit signals or electrical power. A basic Wire Harness may include as few as three discreet components, while the more classic harnesses include many more wires and other passive, and potentially active, components.

A Wiring Harness is often confused with a cable assembly; the main difference between the two is that a cable assembly usually has just two ends while a Wiring harness has multiple branches/ends running off in many different directions with multiple terminations on each branch.

Wiring harness assembly manufacturer:

The typical wire harnesses that include dozens of wires and sometimes hundreds of different components and terminations. Our engineering staff is well versed in the design and construction of wire harnesses and is available to assist in the development of the most efficient harness to meet your demands.

Wire harness assembly used: Micro coaxial cable, Fine Coaxial Cable,SGC cable,Teflon wire,Micro coax, Hook-up wire

MCX cable,Shielding cable,electrical wire, flexible welding cable, wire harness and power cables.

Connector Brand: I-PEX,JAE,Hirose,KEL,ACES,JST, Molex, AMP, Tyco, 3M, As per your request

Pitch: 0.3, 0.4, 0.5, 0.6, 0.8, 1.0,1.25,1.5,2.0,2.5,2.54,3.0MM etc.Lvds Cables Assemblies

Custom LVDS Cable Assembly

 Low-voltage differential signaling (LVDS), also known as TIA/EIA-644, Lvds Cables Assemblies is a technical standard that specifies electrical characteristics of a differential, serial communications protocol. LVDS operates at low power and can run at very high speeds.It has become popular in products such as LCD-TVs, automotive infotainment systems, industrial cameras and machine vision, laptop/tablet computers, and communications systems, high-speed video, graphics, video camera...

Darlox Electronic Limited: https://www.darloxcn.com