Renesas introduced a blood glucose meter MCU, built-in biosensing circuit

Renesas Electronics have developed the RL78 / L1A series of 16-bit MCUs used in battery-powered medical devices, such as blood glucose meters, lactic acid meters and cholesterol testers. The new product is equipped with an analog front end circuit for biosensing. The blood glucose and hemoglobin values ​​that must be measured using different instruments can be measured with the same instrument. And a Promotion Board for immediate evaluation of product functionality.

New products have three characteristics. First, the analog front-end circuit built-in analog switch. Since a suitable circuit can be switched according to the measurement object, it is possible to develop a medical device which measures the hemoglobin and the blood glucose level from the blood interaction.

Second, by providing reference software, it is easy to improve the accuracy of built-in analog front-end functions such as D / A converters, operational amplifiers, A / D converters, and reference voltage circuits. Thirdly, the operating voltage can be drastically reduced by various technical improvements implemented in analog front-end circuits. Can make the blood glucose meter and other measurement functions throughout the battery life are normal.

 Flex flat cable Manufacturers  Micro Coax Cable FFC Cables

IBM's Automated Buses, Passengers Talk to the Virtual Bus Wizard

IBM Japan's Kawasaki Zhixing delivered a speech on September 9 at the "Automotive Future Summit / Transportation NEXT 2016" (organizer: Nikkei BP), introducing the near future of car-oriented services.

In his speech, Jiang introduced the use of IBM-developed artificial intelligence system "Watson" (Watson) "automatic driving bus" Olli ".Olli is Local Motors Corporation and IBM jointly developed 12 small automatic driving bus.IBM using Watson As a "bus guide." More than 30 sensors installed on the car, by Watson to analyze the large amount of data collected by these sensors.

When the passengers asked, "Where there is a delicious restaurant near", Watson will answer "○○ has a shop called × ×." Watson can interact with a number of passengers to communicate with each other, according to the requirements of passengers to guide the bus. According to Jiang Qi introduction, Olli has not yet entered the practical stage, the future will be repeated empirical experiments.

In addition, IBM also with a number of enterprises in the IoT and AI technology cooperation. The company and Honda F1 business in the establishment of a cooperative relationship. Honda's F1 racing data analysis system uses IBM's "IoT for Automotive" for real-time analysis and prediction of faults, fuel efficiency, and performance. In addition, IBM and Fuji Heavy Industries, began to use IBM's AI technology to build driving support system "EyeSight" experimental image data analysis system. In the future it seems that with Fuji Heavy Industries to carry out a new research on automatic driving.

Shielded FFC Cable Flex circuit manufacturer  Flex flat cable Manufacturers 

Darlox Electronic joined revolution of China’s robotics industry

A report shows that China’s industrial robot industry has entered a golden period of development. As labor costs rapid rise and upgrading of industrial restructuring brings amazing “product”, robots to replace manual labor has become a catalyst for rapid development of industry, and makes industrial economy to accelerate the arrival of the inflection point. Currently, industrial robots in China is still in its infancy, but it will have a good future and broad market prospects.

Insiders said that the emerging robot industry will be large-scale high-tech industries appear Following cars, computers. China “Twelve Five” Planing is a key turning point in the development of industrial robots. Market demand will show a spurt of development, the demand for industrial robots will be an annual 15% to 20% growth rate.

As a leading cable solutions provider, Darlox reached a cooperation with a number of robotics manufacturers and signed the relevant contracts provide a variety of sophisticated connectivity solutions for their products.

Darlox CEO Mike Gan, professor of North China Electric Power University, said that automation, industrial robot industrial prospects are very good, to join this innovation automation Revolution, Darlox Electronic will continue to increase R & D investment in this area.

TE Release 0.3 mm rotation lock FPC connector

To improve connectivity miniaturization of electronic products, TE Connectivity today announced that it is launching a pre-0.3 mm rotary locking flexible printed circuit (FPC) connectors. This new series is a low halogen products, including can be connected to up to 71 locations connector type.
TE Connectivity Product Specialists Tyler Madden, said: "This larger rotation before locking position of the actuator size range, wider availability, so product designers can break through the traditional technology constraints, more flexibility with the TE continue. expanding our business scale on the FPC connector market, we are pleased to announce this expansion of product range to meet customer outside the standard range of 10-50 applications require connectors. "

Customers can choose between the rotation lock before or after rotation lock actuators, thus in line with enough variety of consumer electronics, set-top boxes, mobile devices such as the design specification. The pre-rotation lock connector series low halogen environmental protection to meet the current requirements of many consumer products.

Shielded FFC Cable Flex circuit manufacturer  Flex flat cable Manufacturers 

Furukawa introduce Space lithium-ion battery

Furukawa introduce aerospace lithium-ion batteries in Tokyo Big Sight International Exhibition Center "7th International Rechargeable Battery Expo" (March 2, 2016 to 4 days),on the Hayabusa No. 2" is equipped with batteries, high temperature resistant housing or the like.

At the meeting in addition to "Hayabusa No. 2," Using the battery, but also shows the asteroid probe "Hayabusa" and Venus probe "dawn resolution" with the battery. Hayabusa 2 uses multiple nominal capacity 13.2Ah, nominal voltage of 3.6V, weight 590g, per unit mass energy density of 85Wh / kg lithium-ion battery.

The "Hayabusa" is equipped with battery weighs 570g, per unit mass energy density of 83Wh / kg. "No. dawn" with a nominal capacity of the battery 23.5Ah, nominal voltage of 3.6V, weight 785g, per unit mass energy density of 107Wh / kg.

2 Hayabusa asteroid probe launched in December 2014. Furukawa Battery manufacturer responsible for the battery cell.

Shielded FFC Cable Flex circuit manufacturer  Flex flat cable Manufacturers 

Formfutura introduced four new 3D printing wire wood

With the growing popularity of 3D printing, 3D printing material available has become more diverse. Among these, it is estimated by the closeness of the human impact on natural wood, imitation wood properties of 3D printing materials appear unique by many 3D printing enthusiasts and create customer's favorite. And therefore attract a lot of 3D printing wire manufacturers release a variety of unique wooden wire products, Formfutura company based in the Netherlands is one of them.
In the past year, the company for its wooden 3D printing wire series EasyWood adds three unique products Coconut (coconut), Olive (Olive) and Ebony (Ebony), received by the market. Due to the success of these three wooden wire, now, Formfutura has released four new wooden PLAEasyWood line, enabling the company to choose from wood 3D printing wire reaches seven kinds, each of which represents a different type wood.

The four wooden wire are: EasyWoodBirch (birch), EasyWoodPine (pine), EasyWoodCedar (cedar) and EasyWoodWillow (willow), as the name implies, these four wires contain appropriate Wooden components. Specifically, these wires are 40% of the company's ground wood particles plus polymeric binder made suitable for printing, then print out will be no real wood texture. In addition, the company developed EasyWood wire tone and color can be changed by a change in temperature, the user can even print out the rings to create the effect. In addition, the company said, it EasyWood a little polishing, you can get a more realistic wood surface effect.

Currently, EasyWood wire has 2.85 mm and 1.75 mm in two sizes available, price per volume is € 32.95 (net weight 500 g). Although Formfutura company also sells other types of 3D printing material, but the company seems intent on wooden wire as the main product, and compared with similar companies in the market, the type of wood wire Formfutura provided the most.

Shielded FFC Cable Flex circuit manufacturer  Flex flat cable Manufacturers 

Panasonic has developed a scalable and Applied Materials resin film

According to Business Wire reports, Panasonic Corporation today announced that the company has used its proprietary technology to develop a scalable, flexible resin flexible, scalable polymer resin film.

The company will also provide a transparent electrode material and conductive paste and the insulating film used together.

The newly developed insulating material is a film material that can stretch and restitution, and the traditional non-flexible material such characteristics. The material can be folded in a desired manner, and is applicable to all kinds of irregular free-form surfaces, significantly reducing the limitations of existing designs. For example, it can be adapted to support the manufacture of various shapes (such as clothing and body) of a flexible, scalable electronic devices. The newly developed material can be applied to a wide range of uses, from the wearable device to the sensor, the display screen and robots.

Shielded FFC Cable Flex circuit manufacturer  Flex flat cable Manufacturers 

Colorsunny Electronic Limted Presentation

Colorsunny Electronic Co.,Limited is located in Shenzhen, an international well-developed great city in South China. Colorsunny Electronic Co.,Limited is engaged in FFC cables, FPC cables, LVDS wire cables, connectors, electrical enclosures and other related electronic products. With great production capacity, abundant human resource, advanced processing equipment and professional enterprise management, Colorsunny Electronic Co.,Limited is capable of providing products, services and relevant solutions for customers all over the world.

http://www.darlox.com



Shielded FFC Cable Flex circuit manufacturer  Flex flat cable Manufacturers 

FCI Release 0.20 mm pitch FPC connector series

Connectors and interconnect systems as a leading supplier, FCI company to provide customers with a thickness of 0.90mm, 0.20mm pitch flexible circuit board (FPC) connector. The FPC specifically for the XL series is designed to withstand high retention, making it ideal for mobile phones, smart phones, digital cameras and other small household electronic products.
FCI's global product director, Akira Nakia said: "The increasing miniaturization of consumer electronics products is driving the design of a flexible connector toward smaller spacing, lower thickness of development.

Flip actuator connector can be fixed by a snap action cable assemblies, and XL series device can be equipped with a cable lock. FCI These functions are integrated into the new connector design ensures compatibility for automatic multimedia applications.

In the XL series, currently offers 29 models contacts can be used to assemble 0.2 mm thick FPC cable. More Other contacts models will soon launch.

Shielded FFC Cable Flex circuit manufacturer  Flex flat cable Manufacturers 

100% new material or replace conductive graphene interconnects for high-speed low-power

Stanford University Professor Shoucheng Zhang led the research team recently discovered a can achieve 100% efficiency Elsie conductive base material at room temperature, they can bring this new material greater imagination is called "stanene" .
The team includes Stanford University and the US Department of Energy (DoE) SLAC National Laboratory researchers to accelerate their graphene based on the origin of the name and the new tin-based material named "stanene" ── tin Latin "stannum" as a prefix. However, compared to the use of 2D graphene monolayer of carbon atoms, which uses a single layer of tin material stanene. Although they try to avoid this kind of material is referred to room temperature superconductors, but in fact they are quite similar.

Join fluorine atom (yellow) and tin atoms (gray) 2D monolayer implemented stanene new material that can be at room temperature to along the edges (blue and red arrows) provide zero impedance at high temperatures up to 100 ℃ (about 212 ℉) in.

Shielded FFC Cable Flex circuit manufacturer  Flex flat cable Manufacturers 

Neoconix Einführung USB 3.1 (Typ C) X-Beam (TM) Brücke Interconnect Solutions

Neoconix gab heute die Einführung seiner innovativen USB 3.1 X-Beam-Brücke Steckverbinderlösungen. Als neuestes Mitglied der FPConnectedTM Serie, hat das Produkt ausgezeichnete Signalintegrität und Wiederherstellbarkeit und kann die Kosten von innovativen mobilen Plattformen zu speichern. USB 3.1 X-Beam-Brücke Funktion ist es, einen Pullover und Verbindungsanordnung für eine nahtlose Integration, die eine ultra-niedrige Seite der Hoch USB 3.1 Typ C-Schnittstellen enthält zu machen, ein Hochgeschwindigkeits-FPC (flexible Leiterplatte) und einer niedrigen Seite X - BeamFPC to-Board-Steckverbinder.

USB 3.1 X-Beam-Brücke für mobile Designer und Hersteller, um die ideale Lösung, die ihnen schnell helfen können und die nächste Generation seiner High-Speed-Internet zuverlässig bereitstellen zu bringen, während die Länge des Produkts sowie eine Vielzahl von Optionen, um zur Verwirklichung Design-Flexibilität auf. USB 3.1 X-Beam-Brücke können unabhängig voneinander installiert werden, gibt es keine Notwendigkeit, die PCB (Printed Circuit Board) Karte Montagefertigungsprobleme auf den Verzehr von sowohl Kosten und zeitaufwendige Zusammenhang zu betrachten. Designer können nun direkt auf das Signal gesendet werden, also nicht über die Verwendung von abgeschirmten Leiterplatte berücksichtigen müssen, PCB-Board Schichten, Kupferdicke, thermische Faktoren und Schaltungsschutzfragen kümmern. Im Vergleich zur Standard-Vorlage für Pension oder konventionellen FPC-Steckverbinder, USB 3.1 X-Beam-Brücke hat eine bessere Signalintegrität. Darüber hinaus kann es leicht zu erreichen reparierbar, da es in der Lage, leicht zu entfernen / ersetzen Sie die Verbindungsanordnung ist. Neoconix ist immer noch mit seiner einzigartigen PCBeam Technologie entwickelt USB 3.1 Modulkombinationen.

Neoconix Geschäfts David Chen, Senior Director, sagte: "Unsere Kunden sind derzeit ein großer Bedarf an Fach schlanke Steckerlösung, die sie unterstützen können, um den schnellsten Schnittstellenstandard, weshalb wir startete eine integrierte, leistungsstarke USB 3.1 X-Beam zu erreichen. Brücke von Gründen, kann es High-Side-niedrig, überlegene Leistung und beispiellosen Design-Flexibilität zu bringen. "

FPConnected Reihe von führenden integrierten Lösungen FPC-Steckverbinder und der Zusammensetzung, so dass die Hersteller für die rasche Erstellung anspruchsvoller mobiler Anlagen für die Herstellung von High-Performance Low-Side-Design benötigt. William Wang Unimicron-FPC Technology Inc. Präsidenten (mit der thailändischen Xin Xing Technology Co., Ltd.), sagte: "Der Start dieser integrierten Lösungen zeigen Neoconix und Unimicron (Unimicron) Partnerschaft für die Entwicklung in Zukunft werden die beiden Seiten zusammen bieten fortschrittliche High-Performance-Produkte, um die Unterstützung für weitere anspruchsvolle Design-Plattform. Unsere beiden Unternehmen sind jetzt mit der Entwicklung neuer Produkte, und diese neuen Produkte in der Lage, unseren Kunden zu den niedrigsten Kosten zu helfen, schnell und zuverlässig zu entwickeln unverwechselbare Produkt."

Shielded FFC Cable Flex circuit manufacturer  Flex flat cable Manufacturers 

3D-CAD, 3D printers and scanners with the premise of enhanced features

SpaceClaim Japanese company has released a new version of 3D-CAD software "SpaceClaim" (USA SpaceClaim Corp.) "SpaceClaim 2016" to strengthen the function of the content. Focus on strengthening the two functions, one is to take advantage of 3D printers is the prerequisite for the implementation of modeling 3D model editing function, another function is to produce a 3D model of the shape of 3D scanners and other inputs.

First to introduce the first function. These include the elimination of model repair holes and self-intersections and other issues, as well as within the model in order to achieve weight reduction while using a grid-like structure filled with function within the model. It may also use Shrinkwrap feature, the assembly constituted by a plurality of members, can maintain its shape under the same circumstances do integration processing for each member, and the inner space and filling the gap.

Regarding the second feature, the new version for reverse engineering, enhanced 3D model generation function, (polygon collection), and modeling with 3D printer model to generate 3D models based on triangular patches 3D cleaning instrument entered. It can automatically apply the free curve, plane, cylindrical surface, spherical and free-form surfaces and other surfaces in the triangular facets to these data as the basis for detailed modeling. But also a part of the segmented region of triangular facets, as free-form surfaces to describe this part of the surface shape.

In addition, this also strengthens the input wiring of the printed circuit board CAD data through electronic function. The purpose of this feature is the use of structural analysis and thermal fluid analysis and other CAE tools to transfer data. Also, the new version also with 2014 acquired the US company ANSYS SpaceClaim's CAE tools "ANSYS Mechanical" and "ANSYS Icepak" linkage. Further, as the transmission of data to the CAE tool function, also set up the function of the gap between the components constituting the assembly model of connecting. It also takes into account the wish on the part of the assembly to do a detailed analysis of demand, it added the regional sphere or rectangular cut partially assembled model features.

Shielded FFC Cable Flex circuit manufacturer  Flex flat cable Manufacturers 

Avionics release 10A board to board connector for small portable terminal

Japan Aviation Electronics Industry has developed a wide 2.2mm, 0.7mm height fitting small stackable board-to-board connectors "WP10 series." For smart phones, wearable devices and tablet PCs and other small portable terminals.

       The new product is equipped to support high-current power supply terminals, which can be through the smartphone maximum rated current 10A (5.0A / terminal × 4 poles). Signal terminal 2 poles. Power supply and signal terminals are supported torsional stress, two-point contact structure can produce high pull-out strength. With increased force can pull out lock, it is equipped with a fitting surface protection and suppression broken pieces fitting firmly reinforced fastener.

       Operating temperature range -40 ~ + 85 ℃. Contact resistance of 40mΩ or less (initial signal terminal) or less 20mΩ (initial supply terminals). Insertion and removal life 30 times. Signal terminals rated current, AC and DC each 0.4A / 1 pole. Rated voltage, AC and DC are 50V. Insulation resistance 100MΩ or more (initial). A withstand voltage of AC 250Vr.m.s (within 1 minute). Comprehensive insertion force is 40N or less. Integrated pull force 10N or more. Pb-free products on the connector applied to a nickel barrier to prevent solder climbing (Solder Wcking).

Shielded FFC Cable Flex circuit manufacturer  Flex flat cable Manufacturers