FFC cable, also known as Flexible Flat Cable (FFC) can choose any number of pins and pitch, so that more convenient on-line, greatly reducing the volume of electronic products, reduce production costs, increase High production efficiency, the most suitable between moving parts and motherboard, board to board, Miniaturization of electrical equipment for data transmission cables. Common specifications are 0.5mm, 0.8mm, 1.0mm, 1.25mm, 1.27mm, 1.5mm, 2.0mm, 2.54mm And other pitch flexible cable.
Widely used in various printers and print head connection between the motherboard, graphics , Scanners, copiers, stereos, LCD appliances, fax machines, DVD players and other various Products and signal transmission connection plate board. In the modern electrical equipment, almost nowhere.
Common models are as follows:
A type: both ends of the connection and reinforcement plate attached to the insulation tape; Type B: Cross reinforcement plate directly attached to the insulation tape; C type: both ends of the reinforcement Board directly attached to the conductor; D Type: Cross-pasted directly reinforcement plate at both ends of the guide The body; E Type: reinforcement plate attached to one end of the insulating tape, and the other end directly solder; F type: both ends of the reinforcement plate directly attached to the insulating tape, half stripped interior; G Type: Direct solder the ends. FFC technical parameters: number of conductors N: cable The number of copper conductors; pitch P: adjacent to the center line between the two conductors Distance; margins M: outermost between a conductor cable centerline to the edge Distance: full pitch TP: distance between the centerline of the outermost of the two conductors, TP = P * (N-1); total width W: distance from the middle of the two edges of the cable, W = P * (N +1); total length TL: distance from the ends of the cable; insert thickness TT: two cable connection end thickness.
AWM 20624 80C 60V VW-1 Touchpad flexible printed circuit
No comments:
Post a Comment